SL-3PCS KIT SET
| Place of Origin: | Zhejiang, China |
| Use For: | Car Primer Painting/Furniture |
| Feed Type: | Gravity |
| Cup Capacity: | 600ml Plastic ,1000ml Aluminum,300ml Aluminum |
| Paint Discharge: | 100(≥ml/min) |
| Working Pressure: | 43-59PSI |
| Pattern Width: | About 24cm |
| Air Consumption: | 3.5-4.5cfm |
| Air inlet: | 1/4" |
| Color: | Electrophoresis Body |
Superior Material:Spray Guns and Cups are made of aluminium alloy, which is
lightweight, ergonomic design and easy trigger pivot.
Carrying Case:A carrying case with a convenient handle is included for easy
storage and transport.
Usage :Suitable to spray cars, machines, furniture, instruments, drawings,
toys, crafts and small spots.
Package Content:
3 Spray Guns with Cups, 1 Locking Air Regulator with Pressure
Gauge, 2 Wrenches, 2 Cleaning Brushes, 3 Filters, 3 Couplers, 3
Spray Mouths, 1 Extension Rod, 1 Extension Rod, 1 Manual.
Main Features
3 pcs HVLP air spray gun kit which include 3 spray guns. The first
spray gun comes with a 1.0mm needle and nozzle set for finishing
and touch up work, the second one comes with a 1.4mm needle and
nozzle set for lighter materials such as high quality base coats
and clear coats and the third one come with a 1.7mm needle and
nozzle set for heavier materials such a primers, spray fillers, and
upholstery adhesives.
Air inlet: 1/4" NPT
Package Content:
3 Spray guns with cups
Locking Air Regulator with Pressure Gauge
2 Wrenches
2 Cleaning Brushes
3 Filters
3 Couplers
3 Spray Mouths
1 Extension Rod
1 Manual
Selling Units:Single item
Single package size:40X40X15 cm
Single gross weight:8.0 kg
How to Select a Spray Gun Nozzle Tip Size
What Size Spray Tip Should I Use with my Spray Gun?
There are many different things to consider when selecting the
appropriate size spray tip for each job. The amount of information
on the subject can be overwhelming, so we at the Bottom Paint Store
have done our best to make this step easier for you.
There are three main factors to consider when determining the size
tip that will produce the best results.
- First, examine the coating that will be sprayed. Put simply,
heavier coatings will require a larger orifice size than lighter
ones. For example, primers are usually thicker than the
accompanying paint so you should use a 1.7 or 1.8 mm tip to prime
most surfaces. Most painters will stay in the range of 1.2 to 2.0
mm unless the paint being applied is specialized. (See chart
below.)
- The next thing to consider is your project surface area. This
determines the appropriate fan width that your sprayer will
produce, that is, the shape in which the product will leave the gun
nozzle. Airless spray guns have more control over the fan width
than conventional spray guns because the coating is forced through
the tip without being atomized by air. This causes the tip to have
a large impact on the fan width and shape. Most boat projects
consist of large surfaces and so a wide fan will increase the spray
coverage and also provide the ability to spray close to the surface
without too much build up. Smaller surfaces will require a small
fan width to reduce overspray. This also makes it possible to spray
further away from the surface without too much falloff because the
fan is more focused.
- Lastly, consider the
spray gun that is being used. Make sure that the spray tip you plan on using
will be supported by the gun. Most spray gun manufacturers will
provide this information in their product overview.
| Common Spray Tip Sizes and Their Uses |
| Tip size (mm) | Commonly Used for |
| 0.8 | Parting Films – PVA – very fine mist |
| 1.2 | Clear Coats – super fine finishes |
| 1.4 | All Around Tip – clears, base coat, single stage paints |
| 1.6 | General Purpose – light to heavy viscosity materials |
| 1.8 | Primers – will apply primer quickly |
| 2.2 -2.5 | Gel Coats and Resins – for thick resins and not paints |
